Display - Dräger UCF 6000 Instrucciones De Uso

3.2

Display

The thermal image is displayed as defined in the selected application
mode.
The average temperature measured in the marked area is displayed
on the bottom right. The area in which the temperature is measured
depends on the distance to the measured objects. The larger the dis-
tance to the measured objects, the larger the area in which the temper-
ature is measured becomes, and the less precise the temperature
information for the individual objects is. More precise temperature
measurements can be achieved by reducing the distance to the object.
The temperature is displayed in ° C or ° F, depending on the settings.
Dräger UCF 6000/7000
The temperature display can be changed using the supplied PC soft-
ware.
The following symbols may appear in the upper area of the display:
Camera
Symbol Meaning
type
If this symbol flashes, the temperature in-
side the camera is reaching its upper limit.
The camera should be switched off or re-
moved from the hot environment to pre-
vent damage to the camera.
UCF 6000/
The higher the temperature in the cam-
UCF 7000
era, the longer the symbol is displayed.
The symbol stays on permanently once
the max. temperature has been reached.
In this case, the camera switches off au-
tomatically.
This symbol is displayed if the high tem-
UCF 6000/
perature range for the image display is
UCF 7000
active.
The photo memory is 80% full. The
UCF 7000 amount of memory used up is depicted
next to the symbol.
On the right side of the display the temperature range and the corre-
sponding color display are shown.
Description
27