Approvals; Labels - Dräger UCF 6000 Instrucciones De Uso

Optionally, the following accessories are available:
Various carrying straps
Vehicle installation kit with vehicle connection cable
12 V adapter and 12 V power pack for operation on a tripod
Tripod for stationary camera operation
Suction mount for easy mounting on smooth surfaces (e. g. car
hood, vehicle roof)
Clip-on tripod
3.7

Approvals

For Dräger UCF 6000 and Dräger UCF 7000 the following applies:
The thermal imaging camera complies with European Directive
2004/108/EC (electromagnetic compatibility).
The protection class of the thermal imaging camera is IP67 as de-
fined by IEC 60529.
The thermal imaging camera features a class 2 laser according to
IEC EN 60 825-1 and 21 CFR 1040.10.
The Dräger UCF 7000 features an intrinsically safe design and meets
the following explosion protection regulations:
IEC 60079-0:2007
IEC 60079-11:2006
EN 60079-0:2009
EN 60079-11:2007
ANSI/ISA 12.12.01
CAN/CSA E60079-0
CAN/CSA E60079-11
Dräger UCF 6000/7000
It is classified as follows:
for Europe according to 94/9/EC (see declaration of conformity on
page 142): I M2 / II 2G, Ex ib I Mb / Ex ib IIC T4 Gb
for Australia: Ex ib IIC T4 Gb
for the USA and Canada: Class I, Div. 2, Groups A, B, C, D,
Class I, Zone 1, Ex ib IIC T4
3.8

Labels

The thermal imaging camera is marked with a serial number. The year
of manufacture is encoded in the serial number. The year of manufac-
ture can be derived from the 3rd letter of the serial number: A = 2009,
B = 2010, C = 2011, D = 2012, E = 2013, F = 2014, H = 2015,
J = 2016, K = 2017 etc. Example: Serial number ARBH-0054: The
third letter is B, therefore the year of manufacture is 2010.
Warning symbol on the thermal imaging camera:
Laser radiation! Do not stare directly into the laser
beam. Do not point the laser on the head of persons! Al-
ways switch off the laser pointer when it is not used.
Description
31