Operating From The Function Display; Repeating Play - Pioneer DVH-P5000MP Manual De Instrucciones

Playing DVD video discs
Operating from the
function display
1
The following functions can also be operated
from the head units display.
1 Function display
Shows the function status.
2 RPT indicator
Shows when repeat range is selected to cur-
rent chapter (title).
% Press F to display the function names.
Press F repeatedly to switch between the fol-
lowing functions:
RPT (repeat play)PAUSE (pause)DRC (dy-
namic range control)
! To return to the playback display, press
BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.

Repeating play

There are three repeat play ranges for the DVD
playback : DSC (disc repeat), CHP (chapter re-
peat), and TTL (title repeat).
1 Press F to select RPT.
Press F until RPT appears in the display.
All manuals and user guides at all-guides.com
2
2 During DVD playback, press m or n
to select the repeat range.
Press m or n until the desired repeat
range appears in the display.
! DSC  Repeat the current disc
! TTL  Repeat just the current title
! CHP  Repeat just the current chapter
Note
If you perform chapter search or fast forward/re-
verse during CHP, the repeat play range changes
to DSC.
Pausing DVD video playback
Pause lets you temporarily stop disc playback.
1 Press F to select PAUSE.
Press F until PAUSE appears in the display.
2 Press r to turn pause on.
PAUSE:ON appears in the display. Play of the
current track pauses.
3 Press q to turn pause off.
PAUSE:OFF appears in the display. Play will re-
sume at the same point that you turned pause
on.
Using the dynamic range control
This function is not effective when you con-
nected a Pioneer multi-channel processor (DEQ-
P7000) to this unit.
The dynamic range refers to the difference be-
tween the largest and softest sounds. The dy-
namic range control compresses this
difference so that you can clearly hear sounds
even at low volume levels.
! The dynamic range control is effective only
on Dolby Digital sounds.
! This function can be changed only when
the disc is playing.
Section
07
31
En