Operating From The Function Display - Pioneer DVH-P5000MP Manual De Instrucciones

Playing MP3
2 Move the joystick up or down to switch
to the desired setting.
This switches you to the selected setting.
! ON  The first 10 seconds of each track of
the current folder (or the first track of each
folder) is played
! OFF  Tracks will continue to play
3 When you find the desired track, move
the joystick up or down to cancel the scan
play.
Note
After track or folder scanning is finished, normal
playback of the tracks will begin again.
Pausing playback
Pause lets you temporarily stop disc playback.
% Press f during playback.
The icon e is displayed for four seconds and
playback is paused.
# To resume playback at the same point that you
turned pause on, press f again.
All manuals and user guides at all-guides.com
Operating from the
function display
1
The following functions can also be operated
from the head units display.
1 Function display
Shows the function status.
2 RPT indicator
Shows when repeat play is turned on.
% Press F to display the function names.
Press F repeatedly to switch between the fol-
lowing functions:
RPT (repeat play)RDM (random play)
SCAN (scan play)PAUSE (pause)
! To return to the playback display, press
BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Repeating play
For MP3 playback, there are three repeat play
ranges: FLD (folder repeat), TRK (one-track re-
peat) and DSC (repeat all tracks).
1 Press F to select RPT.
Press F until RPT appears in the display.
Section
10
2
47
En