Description Of Display Marks - Citizen CH605 Manual De Instrucciones

8

. Description of display marks

Display mark
Replace
batteries
Measuring
error
Measuring
blood
pressure
symbol
Note: If "EP" appears on the display, just return the device to
your local distributor or importer.
All manuals and user guides at all-guides.com
Condition/Cause
Mark appears in the
measurement condition
and flashes when pulse
is detected.
Appears when the
battery voltage is
excessively low.
Appears when the
accurate blood
pressure could not be
obtained accurately.
Appears all the time
till the measurement
being completed.
10
Corrective action
Measurements in
progress remain quiet.
Replace all two batteries
by new ones.Insert
the batteries at correct
positions beware of the
+/- directions.
Press "START/STOP"
button again and re-
measure. Or check
cuff if wrapped at the
wrist or according to
instructions. Check
palm if exerting effort.
Check if talking
or moving during
measurement. Check
if posture is incorrect.