Detection Range - Waeco MagicWatch MWE910 Instrucciones De Montaje Y De Uso

All manuals and user guides at all-guides.com
MagicWatch MWE910
The complete circuit diagram can be found in fig. f.
No. Designation
1 Control electronics for front sensors
2 Black/blue cable: connection to connected positive (+12 V)
3 Brown cable: connection to earth
4 Yellow cable from the loudspeaker: connection to slot 15 in the plug of the front
sensor connection cable
5 Blue cable from the loudspeaker: connection to slot 3 in the plug of the front sensor
connection cable
6 Yellow/black cable: connection to the speed signal from the speedometer (optional)
7 Red/grey cable: connection to the radio's mute connection (optional)
8 Front sensors
9 Control electronics for rear sensors
10 Reversing light
11 Black/blue cable: connection to the reversing light
12 Brown cable: connection to earth
13 Yellow/red cable from the connection cable of the rear sensor control electronics:
connection to the front sensor control electronics, slot 17
14 Brown cable from the connection cable of the rear sensor control electronics:
connection to the front sensor control electronics, slot 5
15 Rear sensors
7

Detection range

See fig. g
The detection range of the parking aid is divided into four zones
(The figure applies to the front sensors):
Zone 1
This zone is the first limit range. Small objects or those with poor reflective
characteristics may not be detected.
Zone 2
Nearly all objects are displayed in this zone.
Zone 3
Virtually all objects are displayed in this zone, but some objects may come
into the blind spot of the sensors.
Detection range
19