Product Description; Intended Use; Target Group; Scope Of Delivery - Bosch CRI/CRIN SST Instrucciones De Funcionamiento

Juego de comprobación para medición carrera a carrera
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

en
| 18 | CRI/CRIN SST | Product description
3.

Product description

3.1

Intended use

The tester set
CRI/CRIN SST
set CRI/CRIN 848H. The tester set
be used to determine shot-to-shot scatter of injectors.
i
Mixed operation with 1 687 231 904 pressure
sensors is not permissible. 1 687 231 904 pressure
sensors are of a smaller and narrower design than
1 687 231 914 pressure sensors
For your own safety and to prevent damage to the
device as the result of improper operation, read and
follow the original operating instructions carefully.
i
On initial commissioning, the configuration file
"SstPressureSensorSetup.exe" must be started
and executed once (see conversion instructions
1 689 978 563).
3.2

Target group

The product may only be used by trained and
instructed personnel. Apprentices or personnel
undergoing training or instruction may use the
product only under the continuous supervision of an
experienced person.
Children must be supervised to make sure they will
not play with the product.
Only personnel
with sufficient knowledge and
experience in hydraulics is allowed to work on
hydraulic devices.
Instruction on testing diesel components at the Robert
Bosch training center is mandatory.
|
1 689 989 098
2021-02-24
is an add-on to the tester
CRI/CRIN SST
can
3.3

Scope of delivery

Designation
6x adapter for CRI with:
1x sealing cone 1 683 387 114
1x adapter nut M12 x 1.5 1 683 345 051
1x adapter nut M14 x 1.5 1 683 345 052
4x adapter for CRIN with:
1x sealing cone 1 683 387 114
1x adapter nut M12 x 1.5 1 683 345 051
1x adapter nut M14 x 1.5 1 683 345 052
6x pressure sensor with magnetic stud
6x connecting cable for pressure sensor
4x inlet connector
12x O-ring 9.5 x 2 for inlet connector
1 683 386 166
1x extension set for actuation electronics
1x USB connecting cable (5 m)
1x "EP Software" CD
1x CD-TestData
1x Operating instructions
1x Installation instructions
i
The order numbers listed in the section "Scope of
delivery" are given for information purposes only.
Order number
1 685 720 306
1 682 720 308
1 687 231 914
1 684 465 868
1 683 386 166
1 680 210 143
1 687 010 350
1 684 465 563
1 687 000 956
1 687 370 270
1 689 989 098
1 689 978 563
Robert Bosch GmbH

Publicidad

Tabla de contenido
loading

Tabla de contenido