Personal Protective Equipment; Safety Devices On The Product - Husqvarna R 316TX Manual De Usuario

Ocultar thumbs Ver también para R 316TX:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Personal protective equipment

WARNING:
instructions that follow before you use the
product.
Use approved personal protective equipment when
you use the product. Personal protective equipment
cannot fully prevent injury but it decreases the
degree of injury if an accident does occur. Let your
dealer help you select the right equipment.
Always wear approved hearing protection. Long term
exposure to noise can result in permanent hearing
impairment.
Always wear protective shoes or protective boots.
Steel toes are recommended. Do not use the
product barefoot.
Wear gloves when necessary, for example when you
attach, examine or clean the cutting equipment.
Do not wear loose-fitting clothing, jewelry or other
items that can get caught in moving parts.
Keep first aid equipment and fire extinguisher close
at hand.

Safety devices on the product

WARNING:
instructions that follow before you use the
product.
Do not use a product with defective safety devices.
Do a check of the safety devices regularly. If the
safety devices are defective, speak to your
Husqvarna service agent.
Do not make modifications on safety devices. Do not
use the product if protective plates, protective
covers, safety switches or other protective devices
are not attached or are defective.
To do a check of the ignition lock
Start and stop the engine to do a check of the
To start the engine on page 16
ignition lock. See
and
To stop the engine on page 18 .
Make sure that the engine starts when you turn the
ignition key to START.
Make sure that the engine stops immediately when
you turn the ignition key to STOP.
10
Read the warning
Read the warning
Start conditions
These conditions are necessary to start the engine:
The cutting deck is lifted and the parking brake is
applied.
The engine must stop in these situations:
The cutting deck is lowered and the operator lifts
from the seat.
The cutting deck is lifted, the parking brake is not
applied and the operator lifts from the seat.
Try to start the engine without one of the conditions.
Change the conditions and try again. Do this check
daily.
To do a check of the forward pedal and rearward pedal
1. Make sure that the forward and rearward pedals are
not blocked and can be operated freely.
2. Release the forward pedal to brake.
3. Make sure that the product brakes when the forward
pedal is released.
4. For more brake power, push the rearward pedal.
5. Do the same procedure for the rearward pedal.
Parking brake
WARNING:
not work, the product can start to move and
cause injury or damage. Make sure that the
parking brake is regularly examined and
adjusted.
To do a check of the parking brake on page
Refer to
22 .
Muffler
The muffler keeps the noise levels to a minimum and
sends the exhaust fumes away from the operator.
Do not use the product if the muffler is missing or
defective. A defective muffler increases the noise level
and the risk of fire.
WARNING:
hot during and after use and when the
engine operates at idle speed. Be careful
near flammable materials and/or fumes to
prevent fire.
To do a check of the muffler
Examine the muffler regularly to make sure that it is
attached correctly and not damaged.
Protective covers
Missing or damaged protective covers increase the risk
of injury on moving parts and hot surfaces. Do a check
of the protective covers before you operate the product.
If the parking brake does
The muffler becomes very
844 - 009 - 25.11.2021

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

R 316tx awdR 316tsx awd

Tabla de contenido