Maintenance And Storage - Worx WG706E Traducción De Las Instrucciones Originales

Before clearing blockages or unclogging
chute;
Before checking, cleaning or working on
the lawnmower;
After striking a foreign object, Inspect
the lawnmower for damage and make
repairs before restarting and operating
the lawnmower;
If lawnmower starts to vibrate abnormally
(check immediately);
17) Stop the motor, -whenever you leave the
lawnmower;
18) Go slow when using a trailing seat.

mAINTENANCE AND STORAGE

1) Keep all nuts, bolts and screws tight to
be sure the equipment is in safe working
condition;
2) Check the grass catcher frequently for wear
or deterioration;
3) Replace worn or damaged parts for safety.
WARNING:
- Not to use the lawnmower if the cords are
damaged or worn.
- Not to connect a damaged cord to the
supply or touch a damaged cord before it is
disconnected from the supply. A damaged
cord can lead to contact with live parts.
10 10
- Not to touch the blades before the machine
is disconnected from the supply and the
blades have come to a complete stop.
- To keep extension cords away from the
blades. The blades can cause damage to
the cords and lead to contact with live
parts.
- To disconnect the supply (i.e, pulling the
plug from the socket)
- Whenever leaving the machine unattended,
- Before clearing a blockage,
- Before checking, cleaning or working on
the machine,
- After striking a foreign object,
- Whenever the machine starts vibrating
abnormally.
- To carefully read the instructions for the
safe operation of the machine;
- Recommendations:
- Always connect the appliance to a supply
circuit protected by a residual current
device (RCD) with a tripping current of not
more than 30mA.
Electric lawn mower
All manuals and user guides at all-guides.com
SyMBOLS
Read instruction handbook before
operation this machine.
Warning
Keep bystanders away
Blade continues to rotate after
the machine is switched off. Wait
until all machine components
have completely stopped before
touching them.
Beware of sharp blades. Blades
continue to rotate after the motor is
switched off.
Remove plug from mains before
maintenance or if cord is damaged.
Keep the supply flexible cord away
form the blades.
Waste electrical products should
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your
Local Authority or retailer for
recycling advice.
EN