Menu Settings - Ecolab EcoAdd Instrucciones De Servicio

Application example:

Menu settings

Fig. 4: 'Operating mode' 'Pulse' 'Application concentration'
1.
Select the evaluation type 'Application conc.' .
2.
[Press the Next] button
3.
Select Unit '%' .
4.
[Press the Next]
5.
Select the number to the left of the decimal point for 'Pulse interval' and enter '1' .
6.
Select the number to the right of the decimal point for 'Pulse interval' and enter '00' .
7.
[Press the Next]
8.
Select the number to the left of the decimal point for 'Chemical conc.' and enter
'100' .
9.
Select the number to the right of the decimal point for 'Chemical conc.' and enter
'00' .
10. [Press the Next] button
11. Do not place a tick for Pulse memory.
12. [Press the back ] button
NOTICE!
Perform a calibration (see
MAN046939 Rev. 6-10.2021
.
button.
button.
.
for > 1 sec.
Ä Chapter 8.9 'Select' on page 124 ).
34