Settings At The Operating Level - Ecolab EcoAdd Instrucciones De Servicio

10.2

Settings at the operating level

The following screens show example displays for a pump with capacity of
11 l/h. Specifications and information shown will differ for other pump sizes.
Setting the litre capacity at the operating level
Fig. 80: Setting the litre capacity during ongoing operation
1.
On the operating screen, press the displayed 'Litre capacity' for approx. 3 seconds.
2.
This step can be skipped if there is no password query here.
ð The screen switches to the screen for setting the 'Litre capacity' .
3.
'Use the slider to set the litre capacity' to the left of the decimal point.
4.
Select the field for entering the value after the decimal point.
ð The background field colour changes to dark blue, which indicates that the field is
ready for input.
5.
'Use the slider to set the litre capacity' after the decimal point.
6.
[Press the Menu button]
ð The settings are saved and the pump switches back to the operating screen.
The new 'Litre capacity' is displayed on the operating screen.
2
1
If you have activated the [access code]
Ä Chapter 8.5 'Main menu' on page 63 .
We strongly recommend setting the access code!
Ä Chapter 8.8.4 'Access code' on page 93
.
3
, note the following:
143
Operation
4
6
5
MAN046939 Rev. 6-10.2021