Medtronic GUARDIAN 4 Manual Del Usuario página 23

To connect the tester:
1. Hold the transmitter and the tester as shown. Line up the flat side of the tester with the flat side
of the transmitter.
2. Push the tester into the transmitter until the flexible side arms of the tester click into the notches
on both sides of the transmitter.
When properly connected, the green light on the transmitter flashes 6 times.
3. To test the transmitter, check the sensor icon in the app to ensure that the transmitter is sending
a signal (see the MiniMed 780G System User Guide).
4. To clean the transmitter, see Cleaning the transmitter, page 24.
5. After testing or cleaning, disconnect the tester from the transmitter.
Disconnecting the tester
To disconnect the tester:
1. Hold the transmitter body as shown and pinch the side arms of the tester.
2. With the tester arms pinched, gently pull the transmitter away from the tester.
23