Use; Maintenance; Product Identification; Product Description - CAMPAGNOLA Hercules Manual De Uso Y Mantenimiento

Use

• Use the tool only for the purposes indicated in ch. "Product description". Any other kind of use may cause injuries.
• Always check that the safety devices are perfectly efficient.
• Never use the tool if it is damaged, wrongly regulated or only partially assembled.
• Always wear goggles or a visor, safety shoes, anti-vibration gloves and a noise-abatement headset (picture A).
• The working position must be stable and safe.
• Do not leave the tool in the rain. Keep it in a dry place.
• Do not carry the tool by the power supply cable.
• The same operator shall not use the tool for a prolonged time. Two operators shall alternate working for one hour and
then having a one-hour's break. A prolonged use could be excessively tiring.
• When the tool is not used, select the OFF mode with the ON/OFF switch.

Maintenance

WARNING!
Before performing any maintenance operations or adjustments of the mechanical parts of the equipment, wear
protective shoes, gloves and goggles.
• Routine maintenance and repairs can be carried out only by an operator with the necessary physical and intellectual
qualifications.
• Special maintenance and repairs can be carried out only by a qualified operator.
• Before any maintenance or adjustment operations, disconnect the tool from its power source.
• Keep bystanders away when servicing or repairing the machine.
• Only qualified operators are authorised to inactivate the safety devices provided on the machine when maintenance
is to be performed. It is their responsibility to safeguard the operators and the machine. The safety devices should be
activated as soon as maintenance work has been completed.
• All maintenance procedures not dealt with in this manual are to be performed at Authorised Service Points indicated by
the Manufacturer.
• When maintenance or repairs have been completed, the machine can be started again only if duly authorised by the
qualified operators. The service mechanic must make sure:
- work has been completed;
- the machine runs in a trouble-free manner;
- the safety devices are activated;
- no one is working on the machine.

Product identification

The tool identification details are indicated on the CE sticker (4).
Code number
Serial number

Product description

The mechanical head is the top part of an electromechanical harvesting tool.
An electro-mechanical harvester is composed of three main parts: the harvesting head, the extension pole and the power
unit.
The mechanical head can be connected to a long or medium telescopic one (11).
The tool harvesting head makes fruit fall down thanks to its rake (2) rotating movement among the branches.
The rake (2) is made of techno-polymer and fitted with teeth (1). It is extremely light and resistant and makes a rotating
movement.
The rake (2) movement is generated by a motor and is transmitted to the harvesting head by means of an extension pole
(11).
The mechanical head includes the cinematic mechanism operating the rake movements, the rake (2) and its holder.
All information about the harvesting head and teeth (1) operating system can be found in the manual of the chosen power
unit.
WARNING!
Please remember that the tool has been manufactured only for the purposes described in this manual.
IMPORTANT:
The best battery autonomy performance is reached after the first 20 work hours.
Page 16
Production year
(4)
Use and maintenance manual – Traslation of the
original Instructions Rev.: 00, Data 03/07/2020