Troubleshooting
XI
If there is
Make sure
low or no
• the breastshield forms a complete seal around the breast.
suction
• all connections of the kit and breastpump are secure.
• the white valve membrane is laying flat against the yellow valve head.
Check that the valve head is clean and not damaged.
See «Assembly Instructions».
• the diaphragm cap or faceplate on the front of the breastpump fits evenly
and securely.
• the ends of the tubings are fit securely into the backs of the breast-
shields and into the ports on the diaphragm cap or faceplate.
• If single pumping, make sure the port plug is placed into one of the single
pumping ports.
Take care not to kink tubing. If milk is seen backing up into tubing, check
that tubing is not kinked or pinched.
If there is
If milk accidentally gets into the tubings or behind the diaphragm cap
an overflow
1. Turn off the pump and unplug from power source.
2. Refer to cleaning instructions «Tubing care».
3. Use a damp (not wet) cloth to wipe the diaphragm and bag. Do not
immerse the motor unit or any of the bags in water. If necessary clean
the pump kit.
4. When components are completely dry, reassemble breastpump and kit.
Warranty
XII
This is a single user product. Use by more than one person may present a health risk and voids
the warranty. 1-year warranty for the unit from the date of purchase, excluding pump kit, battery
pak, backpack and cooler carrier. The manufacturer is not liable for any damage or consequential
damage caused by incorrect operation, inappropriate usage or use by unauthorized persons.
Disposal
XIlI
The unit is made of various metal and plastics. Before disposal, the device is to be rendered
unusable and it must not be disposed of as unsorted municipal waste in accordance with local
regulations. Use your local return and collection system for waste electrical and electronic equip-
ment (incl. batteries). Improper disposal may have harmful effects in the environment and on
public health.
All manuals and user guides at all-guides.com
EN
9 9