Maintenance And Care; Minimize Wear And Avoid Damage; Maintenance Work - Stihl HTE 60 Manual De Instrucciones

English
Sharpening Tools (special accessories)
Chain pitch Round file
^
inch (mm) mm (inch)
1/4 P (6.35) 3.2 (1/8)
1)consisting of file holder with round file, flat file and filing gauge

21 Maintenance and Care

The following intervals apply to normal operating condi‐
tions only. If your daily working time is longer or operat‐
ing conditions are difficult (very dusty work area, resin-
rich wood, tropical wood, etc.), shorten the specified
intervals accordingly. If you only use the saw occasion‐
ally, extend the intervals accordingly.
Chain Lubrication
Saw chain
Guide bar
Chain sprocket
Safety labels
22 Minimize Wear and Avoid
Damage
Observing the instructions in this manual helps
reduce the risk of unnecessary wear and dam‐
age to the power tool.
The power tool must be operated, maintained
and stored with the due care and attention
described in this instruction manual.
The user is responsible for all damage caused by
non-observance of the safety precautions, oper‐
ating and maintenance instructions in this man‐
ual. This includes in particular:
– Alterations or modifications to the product not
approved by STIHL.
– Using tools or accessories which are neither
approved or suitable for the product or are of a
poor quality.
– Using the product for purposes for which it
was not designed.
44
Round file File holder
diameter
Part No. Part No.
5605 771 5605 750
3206 4300
Check
Inspect, also check sharp‐
ness
Check chain tension
Sharpen
Check (wear, damage)
Clean and turn over
Deburr
Replace
Check
Replace
Replace
Filing gauge Flat file
Part No. Part No.
0000 893 0814 252
4005 3356
X
X
X
X
X
X
X
– Using the product for sports or competitive
events.
– Consequential damage caused by continuing
to use the product with defective components.
22.1

Maintenance Work

All the operations described in the "Maintenance
Chart" must be performed on a regular basis. If
these maintenance operations cannot be per‐
formed by the owner, they should be performed
by a servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
courses and are supplied with the necessary
technical information.
If these maintenance operations are not carried
out as specified, the user assumes responsibility
21 Maintenance and Care
Sharpening
1)
kit
Part No.
5605 007
1000
X
X
X
0458-247-9921-C
X
X
X