Using The Audio Output Being Played Back - Yamaha YSP-3000 Manual De Instrucciones

5
Press TEST when you have completed all
your adjustments.
Notes
• All channel levels cannot be adjusted when the 2-channel or 5-
channel stereo playback (see page 60), My Beam (see page 61),
or My Surround (see page 55) is selected as the beam mode.
• "FRONT L/R" cannot be adjusted when Stereo plus 3 Beam is
selected as the beam mode (see page 55).
• "FRONT L/R" are automatically adjusted depending on the
settings of the other channels when Stereo plus 3 Beam or
stereo playback is selected as the beam mode (see pages 55 and
60).
y
If the level of a particular channel cannot be adjusted, "– –dB"
appears in the front panel display.
Using the audio output being
played back
You can also manually adjust the channel levels while
playing back an input source such as a DVD.
ENHANCER
CAT/
A-E
DISPLAY
VOLUME
MUTE TV INPUT
CH LEVEL
(U.S.A. and Canada models)
TEST
ENTRY MENU
TV/AV
ENTER
YSP
RETURN
CH TV VOL
TV MUTE
CODE SET
TEST
1
Set the operation mode selector to YSP.
TV/AV
YSP
2
Press CH LEVEL repeatedly (or press
CH LEVEL and /
you want to adjust.
The front panel display changes as follows.
CH LEVEL
CH LEVEL
Note
"SWFR" is available only when a subwoofer is connected to
this unit and SWFR is selected for BASS OUT in SOUND
MENU (see page 78).
Adjusting the audio balance
) to select the channel
or
ENTER
FRONT L +1.0dB
CENTER -2.5dB
FRONT R +1.0dB
SUR.R +2.0dB
SUR.L +2.0dB
SWFR --dB
85
En