Using The Audio Output Being Player Back - Yamaha YSP-1100 Manual De Instrucciones

5
Press TEST when you have completed all
your adjustments.
TEST
Notes
• All the channel levels cannot be adjusted when the stereo
playback or my beam is selected as the beam mode (see
pages 47 and 48).
• FRONT L/R cannot be adjusted when the stereo plus 3 beam is
selected as the beam mode (see page 43).
• FRONT L/R are automatically adjusted depending on the
settings of the other channels when the stereo plus 3 beam or
stereo playback is selected as the beam mode (see pages 43 and
47).
y
If the level of a particular channel cannot be adjusted, – –dB
appears in the front panel display.
ADJUSTING THE AUDIO BALANCE
Using the audio output being
player back
You can also manually adjust the channel levels while
playing back an input source such as a DVD.
OFF
0
CH LEVEL
ENTER
TEST
1
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
TV/AV
YSP
2
Press CH LEVEL repeatedly (or press
CH LEVEL and then
channel you want to adjust.
The front panel display changes as follows.
CH LEVEL
CH LEVEL
+10
MENU
TV/AV
YSP
RETURN
/ ) to select the
or
ENTER
FRONT L +1.0dB
CENTER -2.5dB
FRONT R +1.0dB
SUR.R +2.0dB
SUR.L +2.0dB
SWFR --dB
73
En