JVC Exad KD-SHX900 Manual De Instrucciones página 13

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

To search for HD Radio stations only—
HD-Search
1
While listening to any FM/AM
broadcast...
Hold
HD
2
Select either "UP" or "DOWN."
UP:
To search for the HD Radio
stations from the lower to higher
frequencies.
DOWN: To search for the HD Radio
stations from the higher to lower
frequencies.
3
Start searching for a station.
OK
BAND
"HD-Search" begins.
When a station is received, searching stops.
• It takes a long time for this unit to complete
HD-Search.
When HD Radio sound quality changes
frequently
While receiving an HD Radio broadcast,
received signals alternate automatically
between digital and analog to obtain better
reception. Because of this automatic reception,
the sound quality also changes as received
signals change.
If you want to cancel this function, follow the
procedure below.
1
While listening to an HD Radio station...
HD
2
Select "Analog" or "Digital".
Auto:
Activate automatic reception.
Digital: To receive digital signals.
Analog: To receive analog signals.
• If no sound comes out with the current
setting selected, change the setting to one
of the others.
Do not change the setting while receiving a
conventional FM/AM station.
To return to the tuner operation screen...
OK
BAND
• The setting automatically returns to "Auto" in
the following cases:
– When you tune in to another station.
– When you change to another source.
– When you turn off the power.
To tune in FM stations only with strong
signals—LO/DX (Local/Distance-
extreme)
If received signals are weak, you may only hear
noises. By setting LO/DX to "Local," you can
make this unit detects only stations with
sufficient signal strength.
• This works only for conventional FM
broadcast and FM HD Radio broadcast.
Auto
Digital
Analog
lights up.
lights up.
lights up.
To be continued...
13

Publicidad

Tabla de contenido
loading

Tabla de contenido