Descargar Imprimir esta página

Charging Steps - SATA J Serie Manual Del Uso

Cargador del paquete de batería de litio de enchufado transversal de 12v
Ocultar thumbs Ver también para J Serie:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39

Charging steps:

Caution:
Please read the instruction carefully before operating the machine
Charging indication:
1. Charging:
Warning:
The charger and battery pack are designed to be used together. Do not charge the battery pack with other chargers or
charge other battery packs and the non-rechargeable batteries with this charger. Do not make any metal objects in
contact with the pole piece of charger or battery pack. Otherwise, this may cause a short circuit or circuit hazard
2. Precautions before use:
The accompanied battery pack is not charged, and the battery pack that has not been used for a long time is also low-powered
and must be charged before use. Battery pack can only be fully charged after several charge and discharge cycles. It is normal
for the short operation of machine as the machine has been used for several times at the beginning.
3.How to charge:
Charging steps:
1) Plug the charger into a suitable power socket and the green light will come on.
2)Insert the battery pack into the charger and make sure it is fully inserted. Green light will go out and red light will come on,
indicating the start of charging. (See Figure 1)
3)At the end of charging, green light will come on and red light will go out, indicating that the battery pack is full. Unplug the
battery pack and charger plug. (Figure 2)
Warning:
After the battery pack is used for a long time, or exposed to direct sunlight or hot environment, it shall be cooled for a
period of time before it can be recharged so that it can be fully charged.
Charging indication:
Charger is able to detect a fault caused by the battery pack which can be judged according to the indicator status. When a fault
occurs, reinsert the battery pack into the charger. If the fault persists, use another battery pack instead. If the new battery pack
is charged properly, the original battery pack may be invalid. If the new battery pack still produces the same fault indication, the
charger may be damaged and need to be repaired.
10
51503
中文
EN
DE
Figure 1
RU
KO
PT
JA
Figure 2
ES

Publicidad

loading

Este manual también es adecuado para:

51503