Step 1 : Charging The Battery Pack - Sony HANDYCAM HDR-XR500 Guía De Operación

Step 1" Charging the battery pack
Battery pack
Q_ DC IN jack
DC
DIuq
ACAd _= ( "i'P°;er cord mains lead)
_/CHG
ACCESS lamp
(hard disk)
_/CHG lamp
To the wall outlet (wall socket)
You can charge the "InfbLITHIUM" battery pack (H series) after attaching it to your
camcorder.
• 5_u cannot attach any "InioLITHIUM" battery pack other than the H series to your camcorder.
Turn offyour camcorder by retracting the viewfinder and closing the LCD
screen.
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
• Align the • mark on the D(" plug with that o17 the DC INjack.
The _/CHG lamp lights up and charging starts. The _/CHG lamp turns offwhen the
battery pack is fully charged.
When the battery is charged, disconnect the AC Adaptor from the DC IN
jack of your camcorder.
63
_3