Festool RTSC 400 Li Manual De Instrucciones página 13

Sanding work
– Sanding thinly applied undercoat
– Sanding wood with sanding cloth
– Edge breaking on wooden parts
– Smoothing primed wooden surfaces
– Sanding solid wood and veneered edges
– Sanding rebate of windows and doors
– Intermediate sanding of paintwork at edg-
es
– Light sanding of natural wood windows
using sanding cloth
– Smoothing wooden surfaces using sand-
ing cloth before staining
– Rubbing or removing excess limestone
residue using sanding cloth
– Intermediate sanding of paintwork on
stained surfaces
– Cleaning natural wood window rebate us-
ing sanding cloth
– Sanding stained edges
– Sanding of thermoplastics
Changing sanding pad [4a]
An optimal work result can only be achieved
using original accessories and consumables.
The use of non-original accessories or con-
sumables invalidates the right to claim under war-
ranty.
If the StickFix coating on the sanding pad has worn
out, the entire sanding pad can be replaced:
Undo the four screws.
Remove the sanding pad by pulling it down-
wards.
Attach the new sanding pad.
Use four screws to tighten it by hand (2.5 Nm).
Adjusting
wheel set-
4a
ting
4 - 5
3 - 4
DTSC 400 Li
Attaching sanding accessories using Stick-
2 - 3
The suitable StickFix sandpaper and StickFix sand-
ing cloth can be attached quickly and simply to the
1 - 2
StickFix sanding pad.

Affix the self-adhesive sanding accessory to the
sanding pad.
4b
DTSC 400 Li
RTSC 400 Li
Fix [4b]
RTSC 400 Li
13