Installation Options; Individual Appliance; Side-By-Side; Individual Appliances With Partition - Gaggenau RB 492 Instrucciones De Instalación

Installation options

Various installation possibilities are available.
These are only limited by the kitchen design.

Individual appliance

Side-by-Side

If two appliances are set up next to each other, a sealing
kit for Side-by-Side combination should be used in order
to guarantee a stable connection.
For further information see section "Tools and
Accessories which are needed".

Individual appliances with partition

– When dimensioning the partition for model 4, note
the thickness of the door panels to prevent damage
if the doors are opened at the same time.
– Use the Heater Kit for Side-by-Side Installation
if the gap between the appliances is less than
6" (160 mm).
See the section on "Required accessories and
tools/Optional accessories".
– Minimum thickness of the partition
Individual appliance at the end of the
kitchen
If one side of the appliance is visible, a side panel must
be used.
The side panel must be connected firmly to the wall, the
floor and overhead cabinet/fixtures before the appliance
is placed in the installation niche.
The dimensions of the side panel are taken from the
opposite installation niche wall. During installation
ensure that the installation niche is square and the
proper size.
5
/ " (16 mm).
8
7