Oscillo-Saw GOLD II Autopsy
1 Scope of delivery
HB 8891
HEBU oscillating cast cutting saw GOLD II Autopsy
HB 8892-01
Segment saw blade, ø 65 mm
HB 8893-01
Deep saw blade, ø 70 mm, for plaster casts
HB 8877
Special grease, 8 g tube
E 8894-01
2 x open end wrenches
E 8891-03
Torx-wrench with T-handle
Instruction manual
2 Safety remarks
All safety remarks in these operating instructions are marked with the symbol
Before using the saw, carefully read through these operating instructions and the
!
valid national occupational safety regulations and act accordingly.
Please keep these operating instructions for later reference and always include them if the
device is sold or passed on to third parties.
!
Application in accordance with the intended application:
This device is intended for sawing open plaster casts or autopsy.
!
Never rivet or screw signs or symbols onto the device, as this can render the
protective insulation ineffective. We recommend using adhesive signs.
!
Only ever use undamaged plugs and cables.
Check cables and plugs regularly.
!
The mains voltage and specified voltage rating shown at the device must be in
agreement.
!
Only ever use original accessories.
!
Wear personal protective gear such as protective goggles,
ear protectors and gloves.
!
The device must not be operated in areas at risk from explosion.
EN
!
.
17