Changing The Bulb - Siemens S24IR Serie Instrucciones Para La Operación Y Cuidado

Changing the bulb

m
WARNING
To avoid electrical shock which
can cause death or severe
personal injury, disconnect power
to appliance before making
repairs.
After making repairs, reconnect
power.
Switch off the appliance with
the power button! Pull out the
mains plug or switch off the
fuse.
m
CAUTION
Never touch a halogen bulb with
bare fingers.
When inserting a glass halogen
bulb, always hold with a soft cloth.
Halogen bulbs above
Halogen bulb type:
20 W/12 V/socket G4
Release the cover and remove
from the clip.
Pull out the defective halogen
bulb.
16
m
Insert a new halogen bulb.
Touch the halogen bulb with
a soft cloth only.
m
Attach the cover and connect to
the clip.
Halogen bulbs at the
side
Halogen bulb type:
10 W/12 V/socket G4
Pull out the cover rail forwards.
To loosen the cover rail use
a screwdriver.
Remove the disc forwards.
Pull out the defective halogen
bulb.
Insert a new halogen bulb.
Touch the halogen bulb with
a soft cloth only.
Insert the disc.
Insert the cover rail.