Tips
• If the FM broadcast is
noisy, press MONO/ST
(MODE on the remote)
until "Mono" appears in
the display and radio
will play in monaural.
• Next time you want to
listen to the radio, just
press RADIO BAND.
The player turns on
automatically and starts
playing the previous
station.
Use these buttons for additional operations
OPERATE
To
adjust the volume
turn on/off the radio
To improve broadcast reception
FM:
Set the FM ANTENNA SELECTOR at the rear of the
player to "
" (telescopic aerial).
Reorient the aerial for FM.
MW/LW:
Keep the MW/LW loop aerial as far as possible from
the player and reorient it.
If the broad cast is still noisy, connect the external
aerial (page 62).
VOLUME +, –
MONO/ST
Press
VOLUME +, –
(VOL +, – on the remote)
OPERATE
Basic Operations
11
GB