Sony ZS-M50 Manual De Instrucciones página 51

Notes
• When recording a CD
containing CD text
information, a track
name appears in the
display at the time of
labelling. Change the
name according to step
3 on page 50, if
necessary, then press
YES• ENTER. The
track names that have
been labelled on a CD
will not be recorded on
an MD until you press
YES•ENTER to
confirm it.
• Certain characters
contained in the CD
text information (É, å,
ñ, ç, ß, [,], etc.) cannot
be labelled on the MD.
These characters will be
labelled as blanks on
the MD.
During REC IT recording
You can label a track name only. You can input up to
100 characters.
1
During recording, press EDIT.
The display waits for the input of the characters.
2
According to steps 3 and 4 on page 50, label a
track.
3
Press YES•ENTER.
The name is labelled on the MD.
continued
Editing recorded tracks on the MD
51 GB