Combining Recorded Tracks; (Combine Function) - Sony ZS-M50 Manual De Instrucciones

Combining
recorded tracks

(Combine Function)

You can combine two adjacent tracks
into a single one. Using the combine
function, you can combine a number of
fragmented recordings or delete the
unnecessary track marks. All tracks
following the combined track are
renumbered.
Notes
• If "Sorry" appears in
the display, you cannot
combine the tracks.
If you repeat editing on
the MD, you may not
be able to combine the
tracks. This is due to
the system limitations
of the MD (page 68),
but not caused by mal-
function.
• If "Cannot Edit"
appears in the display,
you may be trying to
combine the tracks on
the first track. You
cannot use the combine
function on the first
track.
46 GB
Editing recorded tracks on the MD
Example: Combine the tracks B and C
Track
2
1
number
A
Combining
B and C are combined into one track.
1 2
A
1
Play the track you want to combine.
Example: To combine tracks B and C, play the
track C.
2
Press EDIT repeatedly until "Combine" appears in
the display.
3
Press YES•ENTER.
"Combine OK?" appears in the display; the player
enters the playback pause mode.
If you want to cancel the combine function at
this point:
Press NO•CANCEL or MD p
EDIT
3 4
B
C
3
C
B
.
YES
ENTER
D
D