Moving Recorded Tracks; (Move Function) - Sony ZS-M50 Manual De Instrucciones

Moving recorded
tracks

(Move Function)

You can change the order of the tracks.
After you move the track, the track
numbers are renumbered automatically.
Note
After you
stop
recording,
do not disconnect the
mains lead or move
the player while "TOC
EDIT" is flashing in
the display. If you do
so, recording may not
be done properly.
48 GB
Editing recorded tracks on the MD
EDIT
Example: Moving C to the position of track 1
Track
1
number
A
Moving
Track number of the C changes to 1
1
C
1
Play the track you want to move.
2
Press EDIT repeatedly until "Track Move" appears
in the display.
3
Press YES•ENTER.
"nTrack 003?" appears in the display, and one-
track repeat play starts.
4
Turn the jog dial to select the new track position.
If you want to cancel the move function at this
point:
Press NO•CANCEL or MD p
5
Press YES•ENTER.
"Complete" appears in the display for a few
seconds after the track is moved.
Jog dial
2 3 4
B
C
4
2 3
A B
.
YES
ENTER
D
D