Kärcher MV 3 Manual Del Usuario página 8

Ocultar thumbs Ver también para MV 3:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
Accessory mount
Illustration
 The accessories compartment allows
the storage of suction pipes and suction
nozzles on the appliance.
Steering roller
Illustration
 The steering rollers are located in the
compartment when the appliance is de-
livered. These must be attached prior to
starting up the appliance.
Filter bag
Note: Do not use a filter bag for wet vacu-
uming!
Illustration
 Recommendation: To vacuum fine
dust, use the filter bag.
Cartridge filter
Illustration
 The cartridge filter must always be in-
stalled - with wet and dry vacuuming.
Note: Let the wet cartridge filter dry prior to
using it for dry vacuuming.
Suction hose with connecting piece
Illustration
 Push the suction hose into the connec-
tion on the appliance, it snaps in place.
 In order to disconnect it, push down
with your thumb and pull the suction
hose out.
Note: Accessories, such as suction brush-
es (optional) can be directly attached to the
connecting piece and thus connected to the
suction hose.
For convenient working even in tight spac-
es.
The removable handle can be attached be-
tween the accessories and the suction
hose if necessary.
See position 13.
Recommendation: In order to vacuum the
floor, attach the handle to the suction hose.
8
Removable handle
Illustration
 Connect the handle with the suction
hose until it snaps in place.
Illustration
 To remove the handle from the suction
hose, press the notch using your thumb
and pull off the handle.
Note: Due to removing the handle, acces-
sories can be directly attached to the suc-
tion hose.
Recommendation: In order to vacuum the
floor, attach the handle to the suction hose.
See position 12.
Suction tubes 2 x 0.5 m
Illustration
 Put both suction tubes together and
connect them with the handle.
Crevice nozzle
 For edges, joints, heaters and hard to
reach locations.
Crevice nozzle, 350 mm
Car vacuuming tool
 For cleaning car seats, carpeted surfac-
es, trunk and foot space.
Suction brush
 For the gentle cleaning of sensitive sur-
faces.
For example, center console or dash-
board in car.
Floor nozzle
 Note: For vacuuming dry dirt or water
off the floor - always work with the insert
(brush strip and rubber lip) in the floor
nozzle.
– 8
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido