Automatic Time Limit; Control Panel Pause - NEFF T83I.0.0M Instrucciones De Uso

Changing the time

Automatic time limit

Control panel pause

Note
Touch the 3 symbol and use the touch knob to
change the time.
If a hotplate is in use for a long time without the setting
being changed, the automatic time limit is activated.
The hotplate stops heating. F and 8 flash alternately
on the hotplate display.
The display goes out when you touch any control
panel. You can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).
If you wipe over the control panel while the hob is
switched on, settings may be altered.
To prevent this from happening, your hob has a
control panel pause. Touch the " symbol. A signal
sounds. The control panel is locked for 30 seconds.
You can now wipe over the control panel without
altering any settings.
The main switch is excluded from the control panel
pause function. You can switch off the hob at any
time.
67