Automatic Time Limit; Control Panel Pause - NEFF T44T43N0 Instrucciones De Uso

When the cooking
time has elapsed
Changing the time

Automatic time limit

Control panel pause

Note
2. Set the required cooking time using the
touch knob.
The timer starts counting down after a few seconds.
A signal sounds for one minute and ‹‹ lights up on
the timer display. The V indicator flashes. Touch any
control. The displays go out and the signal ceases.
Touch the 3 symbol and use the touch knob to
change the time.
If a hotplate is in use for a long time without the setting
being changed, the automatic time limit is activated.
The hotplate stops heating. F and 8 flash alternately
on the hotplate display.
The display goes out when you touch any control
panel. You can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).
If you wipe over the control panel while the hob is
switched on, settings may be altered.
To prevent this from happening, your hob has a
control panel pause. Touch the " symbol. A signal
sounds. The control panel is locked for 35 seconds.
You can now wipe over the control panel without
altering any settings.
The main switch is excluded from the control panel
pause function. You can switch off the hob at any
time.
59