Operation; Programs; Quick Start; End Your Workout - Tunturi C85 Manual Del Usuario

English
MAIN MENU
- It will go back to main menu.
- During training, sets console in "end your workout"
mode.
USER SETTING
- Press this button to enter User/Setting mode screen
- This button is of no use during workout
MODE/ ENTER
Turn functions
- Choose workout mode in main menu
- User/setting mode option selection
- Choose working item on the setting screen
- Increase or decrease the setting value
- Adjusting target value (high/low) during workout
- Shift up or down during T-Ride™ or T-Road workout
Horizontal
- Turning clockwise to choose option rightward.
- Turning counter-clockwise for leftward
Vertical
- Turning clockwise to shift up.
- Turning counter-clockwise to shift down
Press functions:
- Sport mode confirmation
- Option confirmation under User/Setting mode
- Confirmation of working item on setting screen
- Setting value confirmation
- Screen switching between BPM-NM or BPM-W
during workout
- Screen switching between BPM-M or BPM-FT
during T-Ride™
- Screen switching between Video - Profile during
T-Road
- Switching to next tutoring mode during T-Trainer™
External connections
USB port
Usb port can be used for:
- USB charge point.
- Service purposes such as software update.
NOTE
• USB format should not be NTFS

Operation

Power on
- Press any key to power on the console when being
in sleep mode..
After loading the application (fig. F-01) the user
interface will be show main menu screen (fig. F-02).
Trainer is now ready to start your workout programming
or just select quick start and begin.

Programs

Quick start

- Turn the jog wheel and select
"Quick start"
- Press the jog wheel to confirm and enter the
workout screen quickly.
(fig. F-03)
The X axis denote time in minutes between 0~30. It is
updated once every 15 minutes during workout
- During workout, press the jog wheel button to
switch the Y-axis between Nm- bpm.
- The bar chart denotes torque value Nm. Rotate the
jog wheel to adjust the Nm value.
- The white dot line shows current position, which
moves rightward as workout time increases. The
workout screen could show 5-hour data at most.

End your workout

The workout end screen pops up when Back/stop
or Main menu is pressed or when the white dot line
reaches the target value. (Fig. F-04)
Continue:
Choose "Continue" to return to workout screen
Exit:
Choose "Exit" to exit to last session screen.
Save&Exit:
Choose "Save&Exit" and enter a file name at the
bottom of the screen: use the jog wheel to select A~Z
or 0~9, save all workout data and name the file for a
new workout mode.
Last session (fig. F-05)
Display the workout data in Last session screen.
Press the jog wheel button to return to main menu.
2 6