Attaching The Fan Blades - Kichler Lydra 52 Manual De Instrucciones

FINISHING THE MOTOR INSTALLATION
Step 3. Securely attach and tighten the canopy hole cover over the shoulder
screws in the mounting bracket utilizing the keyslot twist-lock feature. (Fig. 17)

ATTACHING THE FAN BLADES

NOTE: Before continuing, make sure the power is disconnected by turning off
the circuit breaker or removing the fuse at the circuit box.
Step 1. Place the blade over the blade arm, make sure the bottom edge of blade
is fully seated against the blade arm, securely tighten the blade to blade arm with
three (3) blade screws and washers. Repeat for remaining blades. (Fig. 18)
Step 2. Attach blade arms to the motor assembly with blade arms screws.
(Fig. 19)
12 | KICHLER.COM
Shoulder Screw
Canopy Hole Cover
Fig. 17
Blade
Screw
Blade
Washer
Blade
Fig. 18
Blade
Arm
Fig. 19
Blade Arm