Attaching The Fan Blades - Kichler Parlour LED 300320 Manual De Instrucciones

FINISHING THE MOTOR INSTALLATION
Step 3. Securely attach and tighten the canopy hole cover over the shoulder Step 3. Securely attach and tighten the canopy hole cover over the shoulder
screws in the mounting bracket utilizing the keyslot twist-lock feature. (Fig.17) screws in the mounting bracket utilizing the keyslot twist-lock feature. (Fig.17)

ATTACHING THE FAN BLADES

NOTE: Before continuing, make sure the power is disconnected by turning NOTE: Before continuing, make sure the power is disconnected by turning
off the circuit breaker or removing the fuse at the circuit box. off the circuit breaker or removing the fuse at the circuit box.
Step 1. Install the 4 blades onto the motor by using the screws and washers Step 1. Install the 4 blades onto the motor by using the screws and washers
provided, tighten them securely. (Fig.18) provided, tighten them securely. (Fig.18)
12 | KICHLER.COM
Canopy Hole
Cover
Fig. 17a
Blade
Blade Screw
Fig. 18
Fig. 17b
Blade Washer