Attaching The Fan Blades - Kichler 56 Guardian Manual De Instrucciones

ATTACHING THE FAN BLADES

CAUTION: To Reduce The Risk Of Electric Shock, Disconnect The Electrical
Supply Circuit To The Fan Before Installing Fan Blades.
Step 1. Position the blades over the blade brackets with the threaded posts
showing. Make sure the bottom edge of the blades are fully seated against the
blade brackets. Place the blade covers on the top of the blades, positioning the
holes over the threaded posts. Tighten blade screws to secure the blades to the
blade brackets. (Fig.18)
Step 2. Secure the blade brackets to motor using blade bracket screws as
shown. (Fig.19)
Blade Screw
Blade Cover
Blade Bracket
Fig. 18
Blade Bracket Screw
Fig. 19
56" Guardian | 13
Blade