Attaching The Fan Blades - Kichler 56 Brahm LED Manual De Instrucciones

FINISHING THE MOTOR INSTALLATION
Step 3. Securely attach and tighten the canopy hole cover over the shoulder
screws in the mounting bracket utilizing the keyslot twist-lock feature. (Fig. 17)

ATTACHING THE FAN BLADES

CAUTION: Before continuing, make sure the power is disconnected by turning o
the circuit breaker or removing the fuse at the circuit box.
Step 1. Carefully slide the blade through the slot as shown. Securely fasten the
five blades with blade screws and flat washers. (Fig. 18)
12 | KICHLER.COM
Shoulder Screw
Canopy Hole Cover
Fig. 17
Blade
Blade Screw
Flat Washer
Fig. 18