cecotec Bongo Serie A Connected Manual De Instrucciones página 24

ENGLISH
HOW TO CHARGE THE SCOOTER
1. Open the charge port cover. Make sure it is clean and dry.
2. Connect the charger with the battery and the other end to the power supply. Check the
battery indicator is on.
3. The light indicator on the charger will change when it reaches 99 % charge.
NOTE: Once the colour has changed, stop charging it. If the battery is left to overcharge for
long time the battery service life can be affected.
WARNING: Cover the charge port with the anti-dust cap to avoid any metallic element from
46 BONGO SERIE A
touching it to prevent short-circuits.
CHARGING METHOD 1
CHARGING METHOD 2
Charge port
On-board computer operating:
The on-board computer offers the following functions:
P1: Selecting km/h or mph.
P2: Activating and deactivating cruise speed.
P3: Activating and deactivating start up with kick off (foot).
A.- Riding modes:
To select Eco mode, turn on the display
and red D symbols disappear from the right side of the display.
To select Comfort mode, turn on the display
ENGLISH
Battery interface
and press the menu button until the white D
and press the menu button until the white
BONGO SERIE A 47