Operation - cecotec Bongo Serie A Connected Manual De Instrucciones

ENGLISH

5. OPERATION

PUSH BUTTONS
Power switch: Long press this push push button to turn the scooter on or off.
•
Throttle: Use it to start the scooter up and to accelerate.
•
• Brake: Hold it pressed to stop. Gently step on the rear fender to assist the braking process.
Function: Press this push button to adjust speed. Select between:
•
o ECO mode: No icon is shown on the display.
o COMFORT mode: The displays shows a white "D".
o SPORT mode: The display shows a red "D".
Headlight: Short press the function push button twice to turn the headlight on. The back
•
lights are always on. While the lights are on, short press the function push button twice
to turn them off.
Cruise mode: Ride at steady speed for 6 seconds to enter this mode. To deactivate it,
•
press the throttle or brake.
Note: This mode is not activated in the default configuration.
Note: The back light will blink when using the brakes.
HOW TO RIDE THE SCOOTER
1_Press the power push button for 2 seconds.
44 BONGO SERIE A
3_Place both feet on the footrest.
4_Press the throttle push button with your right
hand and rotate the handle towards your body.
5_ Press the throttle push button to speed up.
WARNING: Do not ride too fast.
6_Press the brake to stop or decrease speed.
Press the rear fender with the foot to assist the
braking process.
7_Only get off the scooter when riding at very
low speed or when it is stopped.
BONGO SERIE A
ENGLISH
45