Stihl FS 55 Serie Manual De Instrucciones página 32

: Place the unit on the ground: It must
rest securely on the engine support
and deflector.
Check that the cutting tool is not
touching the ground or any other
obstacles.
: Make sure you have a firm footing.
: Hold the unit with your left hand and
press it down firmly - your thumb
should be under the housing.
Do not stand or kneel on the drive
tube!
FS 55
Standard versions:
: Pull the starter grip slowly with your
right hand until you feel it engage –
and then give it a brisk strong pull.
Do not pull out the starter rope all
the way – it might break.
Versions with ErgoStart:
: Pull the starter grip slowly with your
right hand until you feel the first stop
– and then pull it out slowly and
steadily.
Do not pull out the starter rope to its
full length – it might break.
English / USA
: Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
8
If the engine is cold:
g
(choke position )
: Crank the engine until it begins to
fire. After no more than five
attempts, set choke lever (8) to e.
: Continue cranking.
As soon as the engine runs:
On version with bike handle:
: Blip the throttle trigger –
the engine will settle down to idle
speed.
On version with loop handle:
: Squeeze throttle until the tongue
disengages –
the engine will settle down to idle
speed.
31