English / USA
Balancing the Brushcutter
The type and style of harness and
carabiner (spring hook) depend on the
market.
The carrying ring is integrated in the
control handle on loop-handled
units – see "Main Parts and
Controls". Loop-handled units do
not need to be balanced.
Attaching the Unit to the Shoulder
Strap
:
Attach the spring hook (1) to the
carrying ring (2) on the drive tube.
28
:
Loosen the screw (3).
Balancing the Unit
Proceed as follows until the conditions
specified under "Floating position" have
been met:
:
Adjust the carrying ring – tighten the
screw moderately – let the unit go
until it is balanced – then check the
floating position.
Floating position
A
Mowing tools
Mowing heads and grass cutting
blades should just touch the ground.
When the correct floating position has
been reached:
:
Tighten down the screw on the
carrying ring firmly.
A
FS 55