Adjustable Height Backrest - Ki Mobility Catalyst 5VX Manual De Instrucciones

IV. WHEELCHAIR USE & CONFIGURATION
N. Pro Elevating Leg Rest (Continued)
5. Raising/Lowering the Pro Elevating Leg Rest
Remove the Pro ELR from the chair or remove weight from the Pro ELR while lowering to avoid a
sudden drop when the lever lock is pushed. The calf pad can also swing outward to clear the
front of the chair during certain movements if necessary.
a. To raise the Pro ELR, lift the leg rest tube (Fig. 13:A) to desired angle of elevation.
b. To lower the Pro ELR, press and hold the lever lock (Fig. 13:B) while pushing the leg rest
tube (Fig. 13:A) down.
c. Retighten the nut.
6. Removing the Pro Elevating Leg Rest
a. To remove the leg rest, push or pull the release latch.
b. Lift the leg rest straight upward to remove. You may also swing the leg rest inward or out-
ward before lifting it off.
O. Adjustable Height Backrest
How to Adjust the Height (Fig. 14)
1. Remove the two bolts from each rear side frame.
2. After selecting the desired height, replace the bolt through the frame and backrest tube.
Fig. 13
A
Fig. 14
B
26