Technical Data; Testing The Battery Before Using It For The First Time; Charging The Battery - Bosch PowerPack 300 Instrucciones De Servicio

English – 2​
(4) On/off button
(5) Key for the battery lock
(6) Battery lock
(7) Upper standard battery holder
(8) Standard battery
(9) Lower standard battery holder
(10) Cover (supplied only on eBikes with two battery
packs)

Technical data

Li-ion battery
Product code
Rated voltage
Nominal capacity
Energy
Operating temperature
Storage temperature
Permitted charging temperat-
ure range
Weight, approx.
Protection rating
A) Standard battery
B) Cannot be used in combination with other batteries in systems with two batteries
C) Rack-mounted battery
Fitting
Ensure the battery is placed on clean surfaces only.
u
Avoid getting dirt, e.g. sand or soil, in the charging socket
and contacts in particular.
Testing the battery before using it for the first
time
Test the battery before charging it for the first time or using
it in your eBike.
To do this, press the on/off button (4) to switch the battery
on. If none of the LEDs on the battery charge indicator (3)
light up, the battery may be damaged.
If at least one (but not all) of the LEDs on the battery charge
indicator (3) lights up, the battery will need to be fully
charged before using it for the first time.
Do not charge or use batteries if they are damaged.
u
Contact an authorised bicycle dealer.

Charging the battery

Use only the charger included with your eBike or an
u
identical original Bosch charger. Only this charger is
compatible with your eBike's lithium-ion battery.
0 275 007 XPX | (23.04.2018)
PowerPack 300
A) B)
BBS240
A) B)
BBS245
C) B)
BBR240
B) C)
BBR245
V = 36
Ah 8.2
Wh 300
°C –5...+40
°C –10...+60
°C 0...+40
kg 2.5/2.6
IP 54 (dust- and
splash-proof)
(11) Charger
(12) Socket for charging connector
(13) Charging socket cover
(14) PowerTube battery safety restraint
(15) PowerTube battery
(16) PowerTube battery safety hook
PowerPack 400 PowerPack 500
A)
BBS260
A)
BBS265
C)
BBR260
C)
BBR265
36
11
400
–5...+40
–10...+60
0...+40
2.5/2.6
IP 54 (dust- and IP 54 (dust- and
splash-proof) splash-proof)
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using it for the first time.
To charge the battery, read and follow the instructions in the
operating manual for the charger.
The battery can be charged at any state of charge. Interrupt-
ing the charging process does not damage the battery.
The battery has a temperature monitoring function which
only allows it to be charged within a temperature range of
0 °C to 40 °C.
Do not reconnect the battery to the charger until it has
reached the correct charging temperature.
PowerTube
A)
BBS270 BBP280 horizontal
A)
BBS275 BBP281 vertical
C)
BBR270
C)
BBR275
36
13.4 13.4
500
–5...+40 –5...+40
–10...+60 –10...+60
0...+40 0...+40
2.6/2.7
IP 54 (dust- and
splash-proof)
If the temperature of the bat-
tery is outside this charging
range, three of the LEDs on
the battery charge indicator
(3) will flash. Disconnect the
battery from the charger and
let it acclimatise.
Bosch eBike Systems
36
500
2.8