Scope Of Supply; Assembly/Adjustments; Setting Up The Wheelchair; Folding Up The Wheelchair - B+B S-Eco 300 Manual De Instrucciones

S-ECO 300
| Standard wheelchair
Modell S-Eco 300 XL
Wide seat
Doubled crossbrace
Base plate extension

3.4. Scope of supply

The contents comprise the following main components:
• wheelchair, pre-assembled
• 1 pair of leg rests
• 1 calf band
• 1 instruction manual
• 1 air pump (only for pneumatic tyres)
11

4. Assembly/adjustments

4.1. Setting up the wheelchair

To unfold your wheelchair after unpacking, please move close to the
wheelchair.
• With one hand, grasp the armrest or the seat tube on one side of the
wheelchair and tip it towards you (Fig. 2).
• With the other hand, push the crossbrace apart until the seat tube
rests fully in the plastic mounting (Fig. 3).
• The seat cushion must be fully extended.
• Activate the parking brakes on the right and left drive wheels.
• Clip in the leg rests.
• Now you can sit down.

4.2. Folding up the wheelchair

To fold up your wheelchair, first swing the foot plates upwards (Fig. 4).
• Move close to the wheelchair.
1b
• Grip the seat cushion at the front and back and pull it upwards (Fig.
5). To stow the wheelchair in a car, you can easily remove the rear
wheels via the quick-release axle.
.
RISK OF ENTRAPMENT! Make sure that you do not
grip the seat tube.
Bischoff & Bischoff GmbH | 13.02.2020
S-ECO 300
Standard wheelchair |
2
3
4
5
12