Controlling The Volume; Using The Headphones - Sony SDM-V72W Manual De Instrucciones

Ocultar thumbs Ver también para SDM-V72W:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Controlling the volume

Using the display's speakers or headphones, you
can listen to sound from your computer or other
POWER
MENU
audio equipment connected to the display's
DK
WIDE
audio input jacks.
INPUT
You can control the volume by using + /- buttons
located at the right side of the display or on the
remote card. When either button is pressed
volume status will appear on your display screen.
1
Press the +/- buttons to display volume
status.
2
Press the +/- buttons to control the
volume.
The volume status will automatically disappear
after about 3 seconds.
Use the MUTE button to mute the sound. Press
MUTE again or + Volume button on the remote
card to restore the sound.
- 33 -

Using the headphones

By connecting your headphones to the display's
headphone jack, you can listen to sound from
your computer or other audio equipment
connected to the display's audio input jacks.
Be sure to remove the headphones before
moving away from the display. If the headphone
cord is pulled away from the display abruptly,
injury or damage may occur.
While displaying the main menu on
z
the screen, use the +/- Volume buttons on
the remote card to adjust the volume. The
+/- Volume buttons on the side of the
display become selection buttons when the
main menu is displayed.
When your display is in power save mode (in
PC mode), no sound comes from the
speakers or the headphones.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido