Specifications - Sony SDM-V72W Manual De Instrucciones

Specifications

LCD panel Panel type: a-Si TFT Active Matrix
Display size: 17.1 inch (diagonally)
Display Resolution Horizontal: Max. 1280 dot
Vertical: Max. 768 lines
Input signal RGB operating frequency*
Horizontal: 28-70 kHz
format
Vertical: 48-85 Hz
Pixel clock: 94.5 MHz max.
PC Input signal Analog RGB video signal:
0.7 Vp-p, 75
levels
SYNC signal:
TTL level, 2.2k
negative
(Separate horizontal and vertical,
or composite sync)
0.3 Vp-p, 75
(Sync on green)
Component Y: 1 Vp-p, 75
negative sync
Video IN 2/RGB IN
Pb: 0.7 Vp-p, 75
Pr: 0.7 Vp-p, 75
Video IN S-Video In (4-pin mini DIN):
Y: 1 Vp-p, 75
negative
C: 0.286 Vp-p, 75
Composite Video (pin jack):
Ω
1 Vp-p 75
sync negative
Audio Output Speaker output: 3W x 2
Headphone jack: Stereo minijack
Impedance 16-48
Audio Inputs
Power Requirements
Power Consumption
Ω
, positive
Operating
Temperature
Ω
, positive or
Display dimensions
(w x h x d)
Ω
, negative
Ω
, 0.3 V
Mass
Ω
Ω
Ω
unbalanced, sync
Plug & Play
Ω
Accessories
unbalanced,
*Recommended horizontal and vertical timing condition
Ω
acceptable
500 mVrms (100% modulation)
Ω
Impedance 47k
Monitor:
16.5 V 3.0 A
Adapter:
Input: 100–240 V~, 50/60 Hz, 1.5 A
Output: 16.5 V 3.03 A
Max. 49 W
(including AC adapter)
5 –35 C°
Upright with stand:
Approx. 472 x 405 x 184 mm
(18.6 x 15.9 x 7.2 inches)
Upright without stand:
Approx. 472 x 348 x 70 mm
(18.6 x 13.7 x 2.8 inches)
With stand:
Approx. 5.9 kg (13 lbs)
Without stand:
Approx. 5.1 kg (11.2 lbs)
DDC2B
See page 8
- 40 -
Horizontal sync width duty should be more
than 4.8% of total horizontal time or 0.8µs,
whichever is larger.
Horizontal blanking width should be more than
2.5µsec.
Vertical blanking width should be more than
450µsec.
Maximum video pixel clock should be less than
94.5 MHz.
Design and specifications are subject to change
without notice.