For Your Safety; General Safety Notes - Fein GX752H5V6 Manual Del Usuario

GX75.book Seite 3 Mittwoch, 20. August 2008 9:09 09
GX 75

1. For your safety.

Read all safety warnings and all
WARNING
instructions. Failure to follow
the warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for future refe-
rence.
Do not use this machine before you have
thoroughly read and completely under-
stood this Instruction Manual, including the fig-
ures, specifications, safety regulations and the
signs indicating DANGER, WARNING and
CAUTION.
Only carry out such operations with this
machine as intended for by FEIN. Only use appli-
cation tools and accessories that have been
released by FEIN.
Please also observe the relevant national indus-
trial safety regulations.
Non-observance of the safety instructions in the
said documentation can lead to an electric shock,
burns and/or severe injuries.
This Instruction Manual should be kept for later
use and enclosed with the machine, should it be
passed on or sold.
SAVE THESE INSTRUCTIONS.

1.1 General Safety Notes.

Pull out the mains plug for main-
WARNING
tenance and repair! Switching
the machine on unintentionally can lead to seri-
ous injuries. Avoid accidental starting by making
sure the switch is in the off-position before plug-
ging in or wiring up the machine.
Always wear protective eye wear
when operating machinery. Eye
wear shall be impact resistant, protective safety
glasses with side shields which comply with
ANSI Z87.1 specifications. Use of eye wear which
does not comply with ANSI Z87.1 specifications
could result in severe injury from breakage of
eye protection.
Always use safety glasses. Also use face or
dust mask if cutting operation is dusty. Eve-
ryday eyeglasses only have impact resistant
lenses, they are NOT safety glasses.
Wear appropriate safety clothing. Wear
leather safety gloves, arm guards, leather
aprons and safety shoes. Wear dust mask
and ear protection.
Wear proper apparel. Do not wear loose cloth-
ing, gloves, neckties, rings, bracelets, or other
jewelry which may get caught in moving parts.
Nonslip footwear is recommended. Wear pro-
tective hair covering to contain long hair.
Keep guards in place and in working order. Do
not operate the machine with any guards
removed. Keep hands in sight and clear of all
moving parts and rotating cutting tools or sur-
faces.
Remove adjusting keys and wrenches. Form habit
of checking to see that keys and adjusting
wrenches are removed from machine before
turning it on.
Keep work area clean. Cluttered areas and
benches invite accidents.
Don't use in dangerous environment. Don't use
power tools in damp or wet locations, or
expose them to rain. Keep work area well
lighted. Special electrics should be used when
working on flammable materials.
Keep children away. All visitors should be kept
safe distance from work area.
Make workshop kid proof with padlocks or mas-
ter switches.
Don't force machine. It will do the job better and
safer at the rate for which it was designed.
Use right machine. Don't force machine or
attachment to do a job for which it was not
designed.
Do not overreach. Keep proper footing and bal-
ance at all times. Failure to maintain proper
working position can cause you to slip and fall
into machine or cause your clothing to get
caught, pulling you into the machine.
Maintain machine with care. Keep machine clean
for best and safest performance. Follow instruc-
tions for lubricating and changing accessories.
us
3