Applications; Delivery Contents - Aventics SERCOS III Instrucciones De Servicio

56 AVENTICS | SERCOS III | R412012610–BDL–001–AB

Applications

During operation
During cleaning
W
Make sure that there is a sufficient exchange of air or enough
cooling if your valve system has any of the following:
– Full equipment status
– Continuously loaded solenoid coils
W
Never use solvents or strong detergents. Only clean the
device using a slightly damp cloth. Only use water and, if
necessary, a mild detergent.
3 Applications
The bus coupler is used to electrically control valves via the
SERCOS III real-time Ethernet system.
The bus coupler is designed for use as a slave only on a
SERCOS III network in accordance with IEC 61158/61784.
4

Delivery Contents

The following is included in the delivery contents of a configured
valve system:
W
1 valve system according to configuration and order
W
1 set of operating instructions for the valve system
W
1 set of operating instructions for the bus coupler
The following is included in the delivery contents of a bus
coupler parts kit:
W
1 bus coupler with seal and 2 mounting screws
W
1 set of operating instructions for the bus coupler
The VS is individually configured. You can find the exact
configuration in the AVENTICS Internet configurator under
your order number.