Applications; Delivery Contents - Aventics PROFIBUS DP Instrucciones De Servicio

60 AVENTICS | PROFIBUS DP | R402003657–BAL–001–AG

Applications

During operation
During cleaning
Waste disposal
W
Make sure that there is a sufficient exchange of air or
enough cooling if any of the following applies:
– Fully equipped system
– Continuously loaded solenoid valves
W
Only use solvents or detergents in low concentrations and
under short term conditions.
W
Do not exceed the conditions for IP69K.
W
Dispose of the device in accordance with local regulations.
3 Applications
The bus coupler module is used to electrically control valves of
the CL03/CL03-XL valve system via the PROFIBUS field bus
system. The bus coupler is mounted directly on the CL03/CL03-
XL valve system to control up to 16/18 valves.
The bus coupler is designed for use as a slave only on a
PROFIBUS bus system in accordance with EN 50170 Part 2.
4

Delivery Contents

The delivery contains:
W
CL03/CL03-XL valve system with PROFIBUS as per
configuration and order
W
Valve system assembly instructions
W
Additional instructions depending on configuration
W
CD R412023902
The valve system is configured individually using the
AVENTICS online configurator (www.aventics.com). At the
time of configuration, an individual order number is
created. This number corresponds exactly to the
configuration delivered.