Bosch HDC100 Instrucciones De Funcionamiento Y Seguridad página 6

2610048761.qxp_HDC100, 200, 250, 300, 400 10/25/17 1:47 PM Page 6
HDC100
AUXILIARY
HANDLE ON
LEFT
INSTALLING ON THE LEFT OR RIGHT SIDE
You can assemble the attachment to the tool
so that the auxiliary handle can be gripped with
either the left hand for right-handed operators
or the right hand for left-handed operators
(Fig. A4). The attachment comes assembled
for right-handed operation (the side handle is
gripped with the left hand).
To assemble the attachment so that the
Assembly
FIG. A4
RIGHT-HANDED
OPERATION
auxiliary handle is gripped with the right hand,
loosen the handle and remove the attachment
from the tool (Fig. A5). Open the housing
clamp lever and remove the auxiliary handle
assembly from the housing (Fig. A6). Rotate
the handle assembly 180 degrees and slide
back onto the housing (Fig. A7). Secure the
housing to the handle by closing the housing
clamp lever (Fig. A8).
FIG. A5
FIG. A7
-6-
AUXILIARY
HANDLE ON
RIGHT
LEFT-HANDED
OPERATION
FIG. A6
FIG. A8