Bosch HDC100 Instrucciones De Funcionamiento Y Seguridad página 16

2610048761.qxp_HDC100, 200, 250, 300, 400 10/25/17 1:47 PM Page 16
HDC400
FIG. D1
HDC400
before making
adjustments or changing accessories.
Such preventive safety measures reduce the
risk of starting the tool accidentally.
Note: make sure the desired chisel is
installed on the hammer before assembling
the dust collection attachment.
Open fully the clamping band lever on the
clamp housing. Push the release lever and
pull the clamping band out. See figure D2.
Position the attachment on the hammer tube
of the tool, wrap the clamping band around
Functional Description and Specifications
To reduce the risk of injury user must read instruction manual for the use of
the tool with this attachment.
SAVE THESE INSTRUCTIONS
DUST PORT
Disconnect the plug
from the power source
any assembly,
ATTACHMENT
HOSE
CLAMP
HOUSING
CLAMPING
BAND
DUST
EXTRACTION
SHROUD
Assembly
FIG. D2
2
3
RELEASE
LEVER
-16-
1
CLAMPING
BAND
LEVER
CLAMPING
BAND